Otomosin
Otomo Resin is a Japanese company that provides high-quality, durable resin products. Using advanced technology, we develop customizable solutions to meet the needs of various industries. We also place importance on environmental considerations and pursue sustainable manufacturing processes. Otomo Resin provides trust and quality to support your business.
Otomo Resin
Otomo - 3D printer cleaning agent -
Cleaning procedure
Otomo - 3D Printer Cleaner Kiyoshi is a low-volatility, non-flammable, colorless, transparent, oily textured resin cleaner (active solvent) with a fragrant smell. It can be washed off with water and soap. Please read the following guidelines before use.
1
Preparation
Prepare two containers, pour an appropriate amount of "Otomo - 3D Printer Cleaning Agent" into one container, and pour clean water into the other container.
2
Immersion or ultrasonic cleaning
印刷が完了したら、樹脂パーツを洗浄剤の容器に入れ、1〜3分間浸漬するか、超音波洗浄機で60秒間洗浄します
3
Air dry
洗浄後、樹脂プリント品を静置して完全に風乾させます
4
Rinse with clean water
次に、プリント品を 清水に入れ、洗浄剤が完全に溶解するまで洗浄します
5
Drying and post-curing
Dry the object and perform a post-curing process.
Tip!
When washing with AC-WASH in the fourth step, it is effective to add a small amount of detergent.
Benefits: Prevents resin from accumulating on the inside walls of the container.
Amount of water: 1.5ml or less per 5kg of water.
Safety and Precautions
Please note!
Use and storage
Please use and store "Otomo - 3D Printer Cleaning Agent" at room temperature, in a dark, well-ventilated place.
Storage location
Keep out of reach of children.
Wearing gloves
It is recommended to wear disposable nitrile gloves when using
Precautions in case of overflow
Although spilled "Otomo - 3D printer cleaning agent" does not immediately pose a fire or health hazard, it will leave behind oily stains and make floors slippery, so it needs to be cleaned up immediately.
揮発性
"Otomo - 3D Printer Cleaning Agent Kiyoshi" evaporates very slowly and does not dry out automatically.